Fish feeders

Disc feeders

For feeding fry feeds smaller than 1,0 mm, Aquaculture ID Disc Feeders are ideal. On a daily basis the ration for a tank for that day is dispersed over the disc feeder plate, allowing the feed to be fed to the fish at fixed intervals or continuously during that day. The Disc Feeders are easy to clean and need to be cleaned every morning before administering the feed for the next day. This prevents the formation of molds.

Ideally the disc feeders are attached to a control unit, allowing individual adjustment of each feeder. To the Aquaculture ID disc feeder control unit up to 20 feeders can be attached. As an alternative the feeders can be attached to an electrical timer switch.

Optionally Aquaculture ID can design and supply the perfect support for these feeders to fit to your tanks.

Automatic feeders with hopper

Aquaculture ID supplies a full range of automatic feeders with hopper for hatchery use, but also for grow out. These feeders are operated through an individual timer, that can be adjusted for the start and end of feeding during each day, the required number of feedings per day, the total time of feeding per day and even the percentage increase per day. This allows full control of feeding!

The hopper attached to the feeder is equipped with a lid, preventing moisture from entering the feed. The feeder with 5 kg hopper is designed for use in hatcheries, while the feeders with a capacity of 10 to 70 kgs are suitable for nurseries and grow out. A special line of automatic feeders is equipped with feed sprayers, dispersing the feed over a large area. This is very suitable for large grow out tanks and ponds. These feeders have hoppers of 50 to 200 kgs, and are able to feed particles from 1,0 to 9,0 mm.

Optionally Aquaculture ID can design and supply the perfect support for these feeders to fit to your tanks.

Pendulum feeders with hopper

Pendulum feeders are very simple, but effective feeders. In these feeders the hopper is equipped with a pendulum mechanism. The feeder is placed above the tank and the pendulum is adjusted to just touch the water surface. Fish in the tank quickly learn that touching the stick results in feed falling in the tank. With proper adjustment of the pendulum, this allow the fish to feed themselves!

Pendulum feeders are only suitable for larger fish; fry and fingerlings are simply too small to move the pendulum. These feeders have hoppers of 10 to 70 kgs., and are able to feed particles from 1,0 to 9,0 mm. The hopper attached to the feeder is equipped with a lid, preventing moisture from entering the feed.

Optionally Aquaculture ID can design and supply the perfect support for these feeders to fit to your tanks.